Jacob Jensen Telephone 50 User Manual page 8

A .3 . Setting language
If you would like to choose another language than the
preset English, please do as follows:
Press and press
press press
Press press
English, deutsch, français, italiano, nederlands, Español,
dansk, Svenska, türkçe, norwegian and press
A .4 . installation and replacement of optional battery
CAution: Always disconnect all phone cords from
the wall outlets before installation or replacement
of the battery.
To install the battery, please follow the instructions below:
1. Prepare one piece of optional back-up rechargeable
battery, SANIK 2.4V 650mAH Ni-MH, model 2SN-AAA65H-
S-J.
2. Remove the table stand, the power supply unit and the
telephone line cord from the base station.
3. Unscrew the battery compartment door with a screwdriver
and lift up the battery compartment door.
4. Install a new or replace the old battery pack as indicated
on the diagram below.
5. Mount the battery compartment door again.
8
three times to select display
twice to select Select lang .
to select your desired language:
Important Notice
• To obtain the best battery performance, the back-up
battery pack should be charged for 10 hours after
first time installation.
• Remove the back-up battery pack from this product if
storing over 30 days.
A .5 . Memory keys
. You can design your own memory keys and print them on
the enclosed silver paper. To fit under the key plate, please
set up the box/text by following this example:
10 mm
Text or symbols should be placed within the dotted windows
measuring 14 x 8 mm each. We recommend to make a test
print on white paper.
To take off the memory key plate and insert the silver paper,
follow the instructions below:
1. Gently pull the left side recess area of the memory key
plate and remove the memory key plate from the base
station.
2. Prepare the silver paper from your package and print out
your own designed memory key text.
3. Use a pair of scissors to cut off the paper slip along the
solid line (66 x 10 mm).
66 mm
Text Text Text Text