Buttons And Their Functions - Jacob Jensen Telephone 50 User Manual

C .

buttonS And thEir funCtionS

Before going through the following keypad functions, it is a good idea to understand that multiple functions may be
assigned to a single button in order to reduce buttons cluster. On some buttons, short and long push on one button gives you
different functions in different modes. Pay attention to the following description regarding long and short push. Short push
means push and release immediately. Long push means push and hold for approximately two seconds.
button
on the handset unit
on the base station
10
in standby mode
Push this button to access the
menus.
To enter digit 0-9.
In standby mode, a short push to
this button will bring you redial
function. Last 10 called numbers
will be kept in the redial memory.
Numbers stored in the redial list can
be up to 24 digits long.
Use and to select
Pick up the
the desired number.
handset or press or
to dial the number.
in conversation mode
Push and hold this button to access
the MUTE function. Release the key
to unmute.
To enter:
Mute, Internal call, Sound Enhancer,
Flash, Redial.
To enter digit 0-9.
In conversation mode, this button
functions as "volume up" for the
handset, the speaker phone and the
headset volume.
in programming / viewing mode
In programming mode, press this
button to confirm a setting.
To enter digit 0-9 or to enter alpha-
bet characters.
In programming & memory review
mode, this button functions as
"scroll up" when a short push is
given. Use to scroll through the
phone book, menu, redial list, or
caller ID log.