Advertisement

Important Safety Instruction
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement or near a swimming pool. Do not allow the handset to come
into contact with liquids or moisture.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may
be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in
a fire. They may explode. Check with local codes for possible special disposal instructions.
Plug the adaptor to the socket-outlet that near the equipment and shall be easily accessible.
Do not open the handset, base station or charger. This could expose you to high voltage.
Do not allow the charging contacts of the charger or the battery to come into contact with
extraneous conductive materials.
Young children should be supervised to ensure that they do not play with the telephone.
Since the phone works by sending radio signals between the base unit and the handset,
wearers of hearing aids may experience interference in the form of a humming noise.
We advise that this phone should not be used near intensive care medical equipment or by
persons with pacemakers.
Your phone can interfere with electrical equipment such as answering machines, TV, and
radio sets if placed too close. It is recommended that you position the base unit at least one
meter form such appliances.
SAVE THESE INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jacob Jensen T10

  • Page 1 Important Safety Instruction When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
  • Page 2 Accessories & Content The following items are included in the package of JACOB JENSEN Telephone 10, with interchangeable speaker-cover/battery door and country adaptor (optional): Telephone Handset Base Station Table Stand Screws and plugs Power supply unit Li-ion 3.7V 650mAh Battery Combo jack Combo cord.
  • Page 3 Illustration Diagram Handset 1. Earpiece 2. Rear Speaker 3. LCD screen 4. Function Keys 5. Dial number Keys 6. Microphone 7. Changeable Speaker-cover and Battery Compartment (user handset) 8. Handset charging contact Base 9. Base charge contacts 10. Charge indicator 11.
  • Page 4 Main Feature List 12 hours talk time 7 days standby time Indoor range 50m Outdoor range 300m Low radiation LCD type, 14 digit x 3 line + icons Flash selectable 80 ~ 800mS Caller ID Type 1 & 2 and DTMF Call log List Hands-free Speaker and ringer volume...
  • Page 5: Table Of Contents

    A. INSTALLATION AND START-UP................7 DISPLAY SYMBOLS AND THEIR INDICATION ..........12 BUTTONS AND THEIR FUNCTIONS..............13 D. PREPARATION BEFORE USE................16 NORMAL OPERATION ..................23 PHONE BOOK......................26 CALLER IDENTIFICATION MEMORY (CALLER ID) ........29 H. PERSONALIZING YOUR PHONE ................ 31 ADVANCED OPERATION ..................
  • Page 6 Congratulations with your new Telephone. The Telephone 10 is designed in Denmark by Jacob Jensen, whose products have gained international recognition for their original, simple and classic design. It is a state of art device created with consideration of form and function. The Telephone 10 is designed for both desktop and wall mounting and a wall mount bracket is included in the gift box.
  • Page 7: Installation And Start-Up

    A. INSTALLATION AND START-UP The cordless phone system can only work under constant power supply to the base station. It is advisable that another corded phone (works without main power supply) is connected to your phone system for emergency call purpose in case of power failure. Caution Use only the Ktec Model KSLFB0750035W1US power adaptor unit that came with unit.
  • Page 8 Plug the power supply into the main wall outlet and connect the other end to the RED jack of the combo jack Connect one end of the telephone line cord to the BLACK jack of the combo jack; connect the other end of the telephone line cord to the country telephone plug adaptor (optional). Connect the country telephone plug adaptor to the wall outlet for telephone.
  • Page 9 2. Pull the combo cord downwards through the groove in order to let it out at the bottom and connect it to the combo jack. 3. Mount the base station by the enclosed screws and plugs for 6mm drill. A.3 Fixing battery 1.
  • Page 10: Important Notice

    Caution Risk of explosion if battery is replaced by an incorrect type. Use only the RTX battery model 60020437 , 3.7V 650mAh Li-ion rechargeable battery pack. Dispose of used batteries according to the instructions. You must install the handset batteries before using the cordless handset. Li-ion batteries must be disposed of in accordance with the applicable waste disposal regulations.
  • Page 11 Press and press 3 times to select Display press press twice to select Select Lang. Press press to select your desired language: English, Deutch, Francais, Italiano, Nederlands, Espanol, Dansk, Svenska, Türkse, Norsk and press A.5 Replacement of Batteries Depending on your usage, it is recommended to change rechargeable batteries every year to achieve best performance.
  • Page 12: Display Symbols And Their Indication

    B. DISPLAY SYMBOLS AND THEIR INDICATION In standby/Idle mode:...
  • Page 13: Buttons And Their Functions

    C. BUTTONS AND THEIR FUNCTIONS Before going through the following keypad functions, it is a good idea to understand multiple functions may be assigned to a single button in order to reduce buttons cluster. To some buttons, short and long pushes on one button give you different functions in different mode. Pay attention to the following description regarding long and short push.
  • Page 16: Preparation Before Use

    D. PREPARATION BEFORE USE Attention Your DECT phone is protected by PINs (personal identification numbers). Never change the PINs of your handset nor base unit unless you are familiar with electronics products and you have a real need to protect your phone by special PINs. A forgotten PIN could stop operation of your DECT phone and may result in expensive technical support services.
  • Page 17 phone in country with FSK caller ID system as date/time information will be received automatically from caller ID signal. For use in country with DTMF caller ID system (or countries with FSK system where date/time is not sent from telephone operator), go through the following procedures to set date/time information:- Key Map:- Time &...
  • Page 18 button to answer a call, even if a handset is on the base or charger. The default setting is “On”. Press the button to return to standby mode. SOUND ENHANCER Key Map:- Sound Enhancer select the tone options You can adjust the Audio Tone of the earpiece. Your phone gives you four audio tone options: Normal, Bass, Alto, or Treble.
  • Page 19 APPOINTMENT Key Map:- Time & Alarm – Set Appointm. –Select your appointment The Date and Time must be set before you can access the Calendar menu option. To set Date and Time, see the section of setting Date and Time. Your phone allows you to set 5 personalized date and time appointments.
  • Page 20 D.10 HANDSET NAME You can select the type of information displayed during a call – the time or the call or the caller’s number (if available). The default setting is Time. Key Map:- Display – Talk Display select Time/Number 1. Press the button to access the main menu.
  • Page 21 D.12 DIAL MODE You can set your phone to use either Tone or Pulse dialing. The pre-set setting is Tone dialing, where you will hear a tone beep each time you dial a number. Most modern exchanges and switchboards use Tone dialing, so you should not need to change this setting. Only change it if your switchboard uses Pulse dialing or if you cannot make a call using Tone dialing.
  • Page 22 Key Map:- Base Settings – Additional Prefix dial enter the number Store 1. Press the button to access the main menu. 2. Press button to select “Base Settings”. Press button. 3. Press button to select “Additional” . Press button. 4. Press button to select “Prefix dial”...
  • Page 23: Normal Operation

    NORMAL OPERATION TO MAKE A NEW CALL You can only make call with your handset. You cannot make call from your base unit. On the handset, press the button and the When you hear the dial tone, enter the telephone number to be called. Entered number will be dialed automatically. After a short delay, the call timer will start timing the call.
  • Page 24 Your handset is given an individual extension number. This individual extension number will be used when making intercom, call transfer & conference conversation. Extension number for handset(s) starts from 1 to 6. In a standard package, your phone comes with one handset and one base unit. TO MAKE AN INTERNAL CALL FROM HANDSET TO ANOTHER HANDSET You may make intercom from your handset to a specific handset extension.
  • Page 25 When the called handset answers, press the button to transfer the call. If the called handset does not answer, press the button to return to the external caller. Conference call You can hold a 3 way conversation (conference call) between your handset, an external caller and another internal handset user.
  • Page 26: Phone Book

    PHONE BOOK There are 100 phone book memory banks built inside this DECT phone (13 characters & 24 digits). You may store frequently used number into these memory banks. If more than one handset comes with your product package (refer to information on package), phone book memories are independent among handsets.
  • Page 27 button once. Store to Phbk is displayed. Press . Enter a name using the keypad and press button to confirm. If you enter a name that is already stored in the phonebook, you will be prompted to enter another name. The number is displayed.
  • Page 28 You will be asked to confirm permanent deletion of phone book record. To confirm, push again and the selected phone book record is deleted and a long beep will be heard. TO CHANGE PHONE BOOK MEMORY Key Map:- Phonebook – your desired number Edit Entry –...
  • Page 29: Caller Identification Memory (Caller Id)

    G. CALLER IDENTIFICATION MEMORY (CALLER ID) If caller ID service is available from your service operator and you have subscribed to this service, telephone number of the caller will be shown on the screens of handset when there is an incoming call.
  • Page 30 TO STORE A NUMBER FROM CALLER ID RECORDS TO PHONE BOOK MEMORY You may store a number from the caller ID record to a new Phone Book memory. Please refer to PHONE BOOK section for details. TO DELETE CALLER ID MEMORY You may delete either a single or all records in the caller ID memory.
  • Page 31: Personalizing Your Phone

    H. PERSONALIZING YOUR PHONE This DECT phone is built with features to offer you personalized settings, such as ringing melody, ringing volume, key click and key lock. Referring to the description of MENU button in previous section, all those personalized settings can be programmed via Menu Programming mode.
  • Page 32 3. Press button to select the “External”, “Internal”, “Paging”, “Alarm”, or “Appointment” and press to confirm. 4. Press button to select the melody you want. (you will hear a sample of each as you scroll through), then press to confirm your selection. 5.
  • Page 33: Advanced Operation

    ADVANCED OPERATION Special Attention!!! Following sections are only for users who are familiar with electronics products. Failure in following steps correctly may stop your DECT phone from normal operation. REGISTERING A NEW HANDSET When you register a new handset to your base, you will be asked to enter your base PIN code. To enable registration mode on base unit, press and hold the button for 5 seconds.
  • Page 34 The handset will automatically be allocated with the next available handset number. If registration is unsuccessful, the display will show “Not registered” and you will need to follow the registration procedure again. DEREGISTERING A HANDSET OR A BASE If you have more than one handset registered to your base or more than one base registered to your handset(s), you can deregister both the handset from the base or the base from the handset.
  • Page 35 SELECTING A BASE You can register the handset with up to 4 bases, e.g. one at work and one at home or one upstairs and one in the garage, and switch between them. Once your handset is registered with other bases, you can either specify the base you want to use or, select “Automatic”...
  • Page 36 5. Press the button to exit and return to standby. For the handset: Key Map:- Add. Settings – Reset handset select yes 1. Press button to access the main menu. 2. Press button to select “Add. Settings” and press 3. Press button to display “Reset Handset”...
  • Page 37: Reverting To Factory Default Setting

    REVERTING TO FACTORY DEFAULT SETTING You may change all setting in your DECT phone back to factory default setting. The only way to reset the handset or base is to go into the menu and choose “handset reset” or “base reset”. Please refer to the above section of “Resetting your phone”.
  • Page 38: Maintenance

    K. MAINTENANCE Do not expose this product to dust, strong sun light, humidity, high temperature, or mechanical shock. Do not use corrosive or abrasive cleansers on this product. Keep the unit dust free by wiping it with a soft, dry cloth. Do not disassemble this product, it contains no user-serviceable parts.
  • Page 39: Troibleshooting

    TROIBLESHOOTING Q1. My phone does not work! A1. Make sure if you have NOT locked your keypad of your handset. When keypad lock is turned on, a symbol will show on the screen. To remove the keypad lock, push and hold the button on your handset for approximately 2 seconds and release the button.
  • Page 40 registered more than 1 base unit to your handset. Q3. The phone book memories do not work as expected! A3. Make sure you do not enter telephone number longer than limits mentioned in the phone book section. A3. If your phone is connected behind a PABX system, consult your system provider for information of timed pause delay required to make an external call.
  • Page 41: Safety Precautions

    M. SAFETY PRECAUTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
  • Page 42: Warrantry And Service

    N. WARRANTRY AND SERVICE Warranty The warranty is the only warranty applicable to this product. All other warranties, express or implied (including all implied warranties of merchantability or fitness for a particular purpose) are hereby disclaimed. No verbal or written information given by Bell Xpress A/S., its agents, or employees shall create a guaranty or in any way increase the scope of this warranty.
  • Page 43: Fcc Compliance

    O. FCC COMPLIANCE Your telephone equipment is approved for connection to the public switched telephone network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. United States FC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 44 Consumer Information: a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:T7HW400BRTX3072. If requested, this number must be provided to the telephone company.
  • Page 45 This is your guarantee of an authentic JACOB JENSEN Telephone. The individual number below matchs the one on your telephone. Individual No. …………………………………………………………………………………………….. Name: …………………………………………………………………………………………….. …………………………………………………………………………………………….. Address: …………………………………………………………………………………………….. …………………………………………………………………………………………….. …………………………………………………………………………………………….. …………………………………………………………………………………………….. Bought from: …………………………………………………………………………………………….. …………………………………………………………………………………………….. Date of purchase …………………………………………………………………………………………….. Product by: Bell Xpress A/S Sletvej 50 8310 Tranbjerg J Denmark...

Table of Contents

Save PDF