Nortel Remote Gateway 50 Configuration Manual page 134

Main office configuration for survivable remote gateway
Hide thumbs Also See for Remote Gateway 50:
Table of Contents

Advertisement

Page 134 of 258
Figure 42
Example of an alternately routed call between a branch office telephone in Normal Mode and
a main office telephone
553-3001-207
Standard 2.00
Alternative Call Routing for Network Bandwidth Management
Telephone B calls Telephone A (the user dials DN 5262). In this example, the
call alternately routes to the PSTN. (The PSTN telephone number of
Telephone A is 613-966-5262.)
Configuration required
Configure the following:
At the main office:
Use one of the dialing plan software packages to process the call, such as
CDP or NARS.
Provision an ALTPrefix for the BO2 zone.
Provision the ALTPrefix as a Steering Code at the main office. Build a
Route List Index (RLI) so these calls go to the virtual trunk or configure
the Vacant Number Routing feature to do the same.
January 2006

Advertisement

Table of Contents
loading

Table of Contents