Relay Box - Iveco N45 MNA M10 Installation Directive Manual

N45 MNA M10
22
N67 MNA M15

Relay box

Figure 15
1
1. JF Connection.
This shall be installed and anchored in such a way as
to dampen the vibrations and stresses occurring when
underway, and they shall be accessible during servicing
operations and when underway.
Inside the box, there are the relays to manage the power of
some parts and two fuses protecting the electrical lines from
accidental short circuits or power surge.
Connect it to wiring using the 16 poles JF connector.
insTAllATiOn direcTiVe
Water presence in the pre-filter sensor
Figure 16
2
04_310_N
1. Pre - filter - 2. Conductor to be connected
in order to enable the proper working of the sensor to
detect water in the fuel, it is necessary that the pre-filter
support is connected electrically to the negative battery
terminal.
In the engine models which use parts with insulated poles
it is necessary to electrically insulate the pre-filter support
from the boat mass and then connect the support with the
negative battery terminal.
1
with the negative battery terminal.
CAUTION
MAY 2006
05_018_V