Meyer Sound HMS-5 Operating Instructions Manual page 15

3. In the Device list, right-click the MPS-488HP powering
the HMS loudspeakers and choose Edit Loudspeaker
Inventory.
4. In the Edit Loudspeaker Inventory dialog box, click in the
Product column and select the HMS loudspeaker model
connected to each MPS-488HP channel output.
■ Single-channel HMS loudspeakers (HMS-5, HMS-10, and
HMS-12) occupy a single channel output.
■ Dual-channel HMS-15 loudspeakers automatically
occupy two channel outputs.
5. Enter a name and serial number for each HMS loud-
speaker.
6. Click OK to save and upload the MPS-488HP loud-
speaker inventory. Once the MPS-488HP device is added
to an RMS page, the page displays the voltage and cur-
rent draw for the connected HMS loudspeakers.
HMS OPERATING INSTRUCTIONS
15