Telephone Setup - Mitel 3300 CITELlink User Manual

Telephone Setup

Each T7406 phone must be registered to a base by sharing an identical
security code. A base can support up to three independent phones. Each
phone assigned to a base station must have a unique Set ID (1, 2 or 3).
When viewing the back of the base station, the TCM/RJ-11 jacks from left to
right correspond to the handset ID # 1, 2, and 3.
To set your phone ID number
1. Press the Options button.
2. Press the SHOW softkey.
3. Press the NEXT softkey until the display shows "6. Handset ID".
4. Press the SHOW softkey. The display shows the current phone ID
number.
5. To change the phone ID number, press the CHANGE softkey. The display
shows "Enter Password".
6. Enter the 6-digit password (default is 000000).
7. Press the OK softkey. The display shows "Press Digit 1-3".
8. Press the dial pad number corresponding to your phone ID number.
9. Press the OK softkey to save the phone ID number.
Note: Talk to your Administrator for information on changing your
password.
-7-