Standard Cmos Setup - ECS P33T-A Instruction Manual

28
For the purpose of better product maintenance, the manufacture reserves
the right to change the BIOS items presented in this manual. The BIOS
setup screens shown in this chapter are for reference only and may differ
from the actual BIOS. Please visit the manufacture's website for updated
manual.

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
Date
Time
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
IDE BusMaster
Drive A:
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Primary/Secondary/Third IDE Master/Slave
Your computer has one IDE channel and each channel can be installed with one or
two devices (Master and Slave). In addition, this motherboard supports four SATA
channels and each channel allows one SATA device to be installed. Use these items to
configure each device on the SATA channel.
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Device :
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
Standard CMOS Setup
Thu 08/09/2007
00 : 03 : 37
Not Detected
Not Detected
Not Detected
Hard Disk
ATAPI CDROM
Not Detected
Enabled
1
1.44 MB 3
: Move Enter : Select
+/-/: Value
F1: General Help
F9: Load Default Settings
Primary IDE Master
Not Detected
Auto
Auto
Auto
Auto
Auto
Auto
Enabled
Enter : Select
: Move +/-/: Value
F1: General Help F9: Load Default Settings
Using BIOS
Help Item
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
/ "
2
F10: Save ESC: Exit
Help Item
Select the type
of device connected
to the system.
F10: Save ESC: Exit