Faqs - JK Audio that-2 User Manual

FAQs

How do I use a microphone
with the THAT-2?
THAT-2 needs a Line level signal to
send audio down the phone line. You
will either have to use a microphone
pre-amplifier or a mic mixer.
When I try to send audio down
the line it won't work.
Firstly, you must send a line level
signal into the Line Input jack on
THAT-2. Secondly, make sure the
gray button is in the In position. This
disables the handset mic and enables
the audio input. Thirdly, check the
Handset Type ABC switch.
6
RemoteAmp Headphone Amplifier
Every time I press in the gray
button I get a loud squeal and
feedback. How do I fix this?
Try changing the setting of the
Handset Type ABC switch. If the
handset type is not set correctly
you could get the feedback you are
describing. Trial and error works best
to find the right handset type but this
info also may help.
A
Electret Dynamic
B C
Carbon