Table of Contents
Advertisement
ALKALINE BAITERY
INSTALLATION
(not supplied)
Insert two AA batteries (not supplied)
into
the battery compartment
on the bottom of
the unit. Be sure to observe
the proper
polarity (the "+" and "-" signs, as indicated
inside the battery compartment).
Notes on Alkaline Batteries
.
When replacing the alkaline batteries,
use two new batteries of the same type.
Do not mix a used battery with a new
one or mix different types of batteries.
When inserting the batteries,
mistak-
enly inserting even one with improper
polarity will cause leakage.
Never charge,
heat, disassemble,
or
throw batteries into a fire.
When the batteries have become dis-
charged, they must be disposed of in a
safe manner that complies with all ap-
plicable laws.
Battery Recharging
or Replacement
If the rechargea~e
;ckel-cadmium
battery
or alkaline
batteries
are weak and dis-
charged, " U
" flashes in the display,
then the power automatically turns off. If this
occurs, recharge the rechargeable
nickel-
cadmium
battery or replace the alkaline
batteries before using the unit.
.
This unit can be used if the recharge-
able nickel-cadmium
battery or alkaline
batteries are removed, as long as the
supplied AC adaptor is connected.
When you are not going to use the unit
for one month or more, take the re-
chargeable
nickel-cadmium
battery or
alkaline
batteries
out of the battery
compartment.
To remove the rechargeable
nickel-cad-
mium battery or old batteries, press down
on one end of the battery so the battery
pops out from the compartment.
NOTE: If the operating
buttons do not
function when pressed...
1.
2.
3.
Check whether the HOLD switch is on
or not.
Remove the batteries
and/or discon-
nect the AC adaptor from the unit. Wait
a few seconds, then reinstall the batter-
ies or reconnect the AC adaptor.
If the buttons still do not function, insert
new batteries or charge the recharge-
able nickel-cadmium
battery.
-En -
Advertisement
Table of Contents
