Managing Multiparty Calls; Using Call Join; Setting Up A Conference Call - Nortel IP Phone 1210 User Manual

Operating your IP Phone 1210

Managing multiparty calls

Use the following features to enable multiparty conversations:
• "Using Call Join" on page 88
• "Setting up a Conference Call" on page 88
• "Using Conferee Selectable Display" on page 89
• "Using Group Call" on page 91

Using Call Join

Use the Call Join feature to connect a new caller to an active call. This
connection creates a conference (conversation involving more than two
parties) between the two callers and yourself.
Conf
Conf

Setting up a Conference Call

Use the Conference feature to initiate a conference call for a group of
three to six people including yourself. The maximum number of people
supported in a conference call depends on the IP Phone configuration.
Conf
88
1. To connect a call on hold to your current
call, press the
2. Press the
Handsfree
caller to your current call.
3. Press the
Conf
person on hold to your conversation.
1. During a call, press the
to place the party on hold.
You hear a dial tone.
soft key.
Conf
key to connect the
soft key again to join the
Conference
key