Lane Change Assist - If Equipped; High/Low Beam Switch; Flash-To-Pass; Automatic High Beam - If Equipped - Chrysler 2017 Pacifica Owner's Manual

Hide thumbs Also See for 2017 Pacifica:

Table of Contents

Lane Change Assist — If Equipped

Tap the lever up or down once, without moving beyond

the detent, and the turn signal (right or left) will flash

three times then automatically turn off.

When the headlights are turned on, pushing the multi-

function lever toward the instrument panel will switch

from low beams to high beams. Pulling back to the

neutral position returns the headlights to the low beam

You can signal another vehicle with your headlights by

lightly pulling the multifunction lever toward you. This

will cause the headlights to turn on at high beam and

remain on until the lever is released.

GETTING TO KNOW YOUR VEHICLE 115

Automatic High Beam — If Equipped

The Automatic High Beam system provides increased

forward lighting at night by automating high beam

control through the use of a digital camera mounted on

the windshield. This camera detects vehicle specific light

and automatically switches from high beams to low

beams until the approaching vehicle is out of view.

NOTE: Broken, muddy or obstructed headlights and

taillights of vehicles in the field of view will cause

headlights to remain on longer (closer to the vehicle).

Also, dirt, film and other obstructions on the windshield

or camera lens will cause the system to function improp-

1. Select "Automatic High Beams — ON" through the

Uconnect system. Refer to Uconnect Settings" in

"Multimedia" for further information.

Chapters

Table of Contents