Chrysler 2017 Pacifica Owner's Manual page 583

Hide thumbs Also See for 2017 Pacifica:

Table of Contents

leverage. Tighten the lug nuts in a star pattern until

each nut has been tightened twice. Refer to "Torque

Specifications" in the "Technical Data" section for

proper wheel lug nut torque. If in doubt about the

correct tightness, have them checked with a torque

wrench by your authorized dealer or at a service

7. After 25 miles (40 km) check the lug nut torque with a

torque wrench to ensure that all lug nuts are properly

seated against the wheel.

Vehicles Without Wheel Covers

1. Mount the road tire on the axle.

2. Install the remaining lug nuts with the cone shaped

end of the nut toward the wheel. Lightly tighten the

To avoid the risk of forcing the vehicle off the jack,

do not tighten the wheel nuts fully until the vehicle

has been lowered. Failure to follow this warning may

result in serious injury.

3. Lower the vehicle to the ground by turning the jack

handle counterclockwise.

4. Finish tightening the lug nuts. Push down on the

wrench while at the end of the handle for increased