Cleaning The Parksense System; Parksense System Usage Precautions - Chrysler 2017 Pacifica Owner's Manual

Hide thumbs Also See for 2017 Pacifica:

Table of Contents

second pop-up duration. The car graphic will remain

displayed for as long as the vehicle is in REVERSE. Refer

to "Display" in "Getting To Know Your Instrument

Panel" for further information.

If PARKSENSE UNAVAILABLE WIPE REAR SENSORS

or PARKSENSE UNAVAILABLE WIPE FRONT SEN-

SORS appears in the Electronic Vehicle Information

Center (EVIC) or Driver Information Display (DID) make

sure the outer surface and the underside of the rear

fascia/bumper and/or front fascia/bumper is clean and

clear of snow, ice, mud, dirt or other obstruction and then

cycle the ignition. If the message continues to appear see

an authorized dealer.

PARKSENSE UNAVAILABLE SERVICE RE-

QUIRED message appears in the EVIC/DID, see an

authorized dealer.

Cleaning The ParkSense System

Clean the ParkSense sensors with water, car wash soap

and a soft cloth. Do not use rough or hard cloths. Do not

scratch or poke the sensors. Otherwise, you could dam-

age the sensors.

• Ensure that the front and rear bumper are free of snow,

ice, mud, dirt and debris to keep the ParkSense system

operating properly.

• Construction equipment, large trucks, and other vibra-

tions could affect the performance of ParkSense.

• When you turn ParkSense off, the instrument cluster

will display "PARKSENSE OFF." Furthermore, once

you turn ParkSense off, it remains off until you turn it

on again, even if you cycle the ignition key.

STARTING AND OPERATING 461

Table of Contents