Operation - Hyundai H-SWE1-30V-UI065 Instruction Manual

Electrical instant water heater
CAUTION!
Proper grounding is important for minimization of electrical shock
and fire hazards.
The water heater is designed for connection to the electrical mains with single-phase voltage of
220V. Before connection, make sure that parameters of the electrical mains at the connection
point meet the parameters indicated on the name plate with specifications of the appliance.
During installation of the water heater, observe the effective electrical safety rules. The electrical
socket shall be designed for rated current not less than 10A. The electrical cable shall have
conductor area not less than 3x1.5 mm2 (for copper).

OPERATION

5
1 - Heating indicator
2 - ECO position
3 - Thermostat knob
4 - Maximum water heating temperature position
5 - Off position
Open one of the demountable valves at outlet from the water heater and open the cold water
inlet valve. When water starts to freely flow out from the demountable valve, close it and insert
the plug of the power cord to the socket. When the water heater is used, the cold water inlet
valve shall be in open position.
The water heating temperature in the water heater can be set in the range from +35°C to +75°C.
To increase the water heating temperature, rotate the thermostat knob clockwise. To decrease
the water heating temperature, rotate the thermostat knob counter-clockwise.
The water heater automatically maintains the set water temperature. When water temperature
in the water heater reaches the user set value, heating will be automatically stopped and the
heating indicator will extinguish. When water temperature in the water heater decreases below
the user set value, heating will be automatically activated and the heating indicator will light up
with bright pink color.
CAUTION!
Refer to «Water heater safe operation and installation rules»
11.
1
55°C
45°C
2
35°C
3
4
0°C
75°C
Approximate
temperature scale
EN
61°C
68°C