Options - Extel WEVP 2100 E R2 SERIES Installation And User Manual

8. OPTIONS

• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• Power supply MODULO
9. TECHNICAL ASSISTANCE - GUARANTEE
Problems
• The monitor does not
light up
• Poor image and/or sound
quality
• Image too bright
• White screen, no ring
tone
• No ringer
• No sound indoors
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE :
0892-35-00-69
Last version of the dowloadable manual in color on :
NL
Possibles Cause
• There is no power supply
to the monitor
• Environnement
• Camera position
• Installation
• Use
• Setting
€
www.cfi-extel.com
CFI EXTEL WEVP 2100 E SER.R2 - 10/2011 - V1
Remedies
• Check that the adaptor plug is correctly connec-
ted.
• Check the calibre of the cables used and that
the videophone connrecting cables are not in
the same sheath as the 230 V cables.
• Make sure that the camera lens is not poin-
ting directly at the sun
or at a reflective surface.
• Check the installation cable: perform a table-
top trial with 30 cm
of cable.
• Ring tone volume setting on silence.
• Set the "volume" potentiometer of the moni-
tor