Removing The Wireless Lan Module - Clevo W330SU2 Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
4. The Wireless LAN module
5
5. Lift the Wireless LAN module
a.
b.
2
4
3
(page 2 - 5), and bottom case
(Figure 7a
1
& , then remove screw from the module socket
2 3 4
(Figure 7c) will pop-up.
(Figure 7d) up and off the computer.
5
c.
1
d.
(page 2 - 6).
) on the mainboard.
(Figure 7b
5
5
Removing the Wireless LAN Module 2 - 11
Disassembly
Figure 7
Wireless LAN
Module Removal
) .
a. Locate the wireless LAN
module.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to
''2''socket
b).

5. WLAN Module.
• 1 Screw
''1'' +
(Figure