Panasonic CF-R1 Series Reference Manual page 32

SD Memory Card/MultiMedia Card
5
Select the functions you want to use and the SD memory card
setting method, then select [Next]
Use when starting computer:
Add the check mark if you want to use the SD memory card instead of a pass-
word entry in order to start the computer. As many as two SD memory cards
can be registered for a single computer.
Use when logging on to Windows:
Add the check mark if you want to use the SD memory card instead of a pass-
word entry on the Windows logon screen.
The Windows logon user and a password must be set in advance.
Windows XP
If the check mark is added, the Welcome screen will no longer appear and the
user switching function will be disabled.
Leave set*
Set and eject*
* The setting method is set separately for each computer. Different SD memory
cards may not use different setting methods on the same computer. To change
only the setting for [Use when starting computer], change the setting in [Se-
curity] menu of the Setup Utility. (
6
Select [Restart the computer after entering settings], then select
[Finish]
7
Change the settings as necessary
Operation differs depending on the setting in step 5.
If you add the check mark for [Use when starting computer] in step 5:
<If the Supervisor Password has been set>
Enter the Supervisor Password, then select [OK].
<If the Supervisor Password has not been set>
1 Enter the Supervisor Password, then press Tab .
2 Reenter the Supervisor Password entered in step 1, then select [OK].
3 Select [Yes] on the confirmation screen.
If you add the check mark for [Use when logging on to Windows] in step 5:
1 Enter the user name, then press Tab .
2 Enter the password, then press Tab .
3 Reenter the password entered in step 2, then select [OK].
4 Select [Yes] on the confirmation screen.
CAUTION
An SD memory card with the above settings can be used as an ordinary
memory card in other devices as well. When using the SD memory card in
another device, do not delete [Private] folder. Doing so will cancel [Use
when logging on to Windows].
: Add the check mark if you want to leave the SD memory
card put in place instead of entering a password. The card
may be removed after the computer is started or after you
log on to Windows.
: Add the check mark if you want to set and eject the SD
memory card instead of entering a password.
page 50 )
32