Key Combinations - Panasonic CF-R1 Series Reference Manual

Key Combinations

CAUTION
Do not press the following key combinations while using the touch pad (external mouse) or other keys.
NOTE
Do not press the following key combinations until you log on to Windows and the hard disk drive indicator turns off.
Note, however, that the key combinations Fn + F1 , Fn + F2 and Fn + F3 are operable in the Setup
Utility.
The key combinations below may not work while some applications are running. Besides, the popup window may
not be displayed depending on the state of the application you are using (e.g., when [Command Prompt] screen
is set to "Full Screen").
Key Functions
LCD brightness
Fn + F1
control ( down)
LCD brightness
Fn + F2
control ( up)
Display change
Fn + F3
Speaker on/off
Fn + F4
switch
Volume control
Fn + F5
( down)
Fn + F6
Volume control
( up)
Function Descriptions
Pressing this key combination adjusts the brightness of LCD.
The brightness setting is stored in memory separately un-
der the condition the AC adaptor is connected and under
the condition the AC adaptor is not connected.
By pressing this key combination, you can select either
an external display, LCD or simultaneous. (
This combination does not work when [Command Prompt]
screen is set to "Full Screen".
CAUTION
Do not press another key until the display desti-
nation has been completely switched.
Do not press this key combination while MPEG
files are playing.
NOTE
Windows XP
When switching to a different user with the Fast User
Switching function, this key combination may not
work. In this case, log on with the administrator au-
thority again, not using the Fast User Switching func-
tion, and try the operation once more.
Pressing this key combination turns on/off audio from the
internal speaker and headphone jack.
NOTE
Disabling the speaker will also disable the warn-
ing beep.
Speakers connected to the USB port cannot be
muted.
Pressing this key combination adjusts the volume of the
internal speaker and headphone jack.
NOTE
This key combination cannot be used to adjust the
volume of the warning beep or speakers connected
to the USB port.
Popup Window
(Displayed after log-
ging on to Windows)
page 38)
OFF
(MUTE)
ON
3