Panasonic CF-R1 Series Reference Manual page 9

Touch Pad
Hints for Easier Touch Pad Operation
You can change various touch pad settings using the following procedure:
Windows 2000 :[Start] - [Programs] - [Panasonic] - [Touch Pad Utility Setting]
Windows XP : [start] - [All Programs] - [Panasonic] - [Touch Pad Utility Setting]
Settings can be changed for the following functions:
• Use Touch Pad function (On/Off)
• Display icon in task tray (On/Off)
• Animated icon in task tray (On/Off)
• Rotate icon when wheel is operated (On/Off)
• Scroll item under mouse cursor (On/Off)
• Scroll speed setting
• Set initial scroll scope
On screens that cannot be scrolled (e.g., desktop screen), if you use the touch pad
as described in Step 3
causing the cursor to freeze. If this happens, remove your finger from the touch pad
and begin again, this time starting from the center of the touch pad.
Using the Virtual Scrolling Function
Because the Touch Pad Utility and the Virtual Scrolling function both offer scrolling
functions that use the touch pad, these two features cannot be used simultaneously. If
you try to use them at the same time, a message may be displayed asking you if you
want to enable the Touch Pad Utility.
• To use the Touch Pad Utility:
Select [Yes]. The Virtual Scrolling function will be disabled.
• To use the Virtual Scrolling function:
Select [No], and then remove the Touch Pad Utility and set the Virtual Scrolling function
using the procedure shown below. In this case, the Touch Pad Utility will be disabled.
Windows 2000
1
Log on with the administrator authority
2
Select on the taskbar with the right button, and select [Exit]
• If is not displayed on the taskbar, display it using the following procedure.
In [Start] - [Programs] - [Panasonic] - [Touch Pad Utility Setting] - [General
settings], add a check mark for [Display icon in task tray] and select [OK].
3
In [Start] - [Settings] - [Control Panel] - [Add/Remove Pro-
grams], select [TouchPadUtility], then select [Change/Re-
move]
4
At the confirmation message, select [OK], then select [Finish]
5
Select at [Add/Remove Programs]
6
Select [Start] - [Settings] - [Control Panel] - [Mouse] - [De-
vice Settings]
7
Select the device name in [Devices] (e.g., Synaptics
TouchPad), then select [Settings]
( page 8), the computer may try to scroll the screen,
9
(To next page)