Deployment System; Accessories; Operation; General - Bosch TCC78K750 Instruction Manual

Hide thumbs Also See for TCC78K750:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 29

Deployment system

The appliance can be pulled out of the built-
in unit automatically. To do this,
m
press
(8) (appliance must be switched
on for this) or
remove grate and pull on the handle
underneath which is now accessible:
The appliance now moves automatically into
deployment position 1. In this position it can
be fi lled with water, coffee beans, ground
coffee and cleaning/descaling tablets, and
the accessories on the right of the appliance
can be removed.
To pull the appliance out fully,
m
press
(8) again and pull the appliance
out by hand into position 2 or
pull the appliance out fully by the handle.
In deployment position 2 the brewing unit
can be removed and the grinding unit ad-
justed.
Deployment position 1
Then push the appliance back fully into the
built-in unit.
During the brewing process, auto-
matic deployment is prevented.
Bosch
Deployment position 2

Accessories

The fully automatic espresso machine has
special compartments for storing the acces-
sories and quick reference guide (23) with
the appliance. These are located on the right
side (15, 16) and are accessible when the
appliance is pulled out into deployment posi-
tion 1.

Operation

General

Fill the water tank with fresh, uncarbonated
water only, and preferably use only beans
for fully automatic coffee and espresso ma-
chines. Do not use coffee beans that have
been glazed, caramelised or treated with
other additives containing sugar, since they
will block the brewing unit.
If the appliance is being used for the fi rst
time or has not been operated for a long pe-
riod, the fi rst cup of coffee will not have the
full aroma.
When using the espresso machine for the
fi rst time, you will achieve a suitably thick
and stable "crema" only after the fi rst few
cups have been dispensed.
The factory settings of the fully automatic es-
presso machine are programmed for optimal
performance. The appliance switches to
"energy saving mode" automatically after
one hour. This setting, like many others, can
be changed (see "Auto off after" under "Dis-
playing settings").
Do not press the power switch while the ap-
pliance is operating. The appliance should
only be switched off when it is in "energy
saving mode", so that it can rinse automati-
cally.
English | 
TCC78K750 | 01/2009

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents