Basic Operations - JVC KD-SH99 Instructions Manual

2
1
1
Turn on the power and select the
source.
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows:
FM TUNER CD PLAY
or
AM TUNER
AUX INPUT
* If a disc is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the CD changer, you
cannot select it as the source to play.
To operate the tuner (FM or AM),
see pages 8 – 10.
To play a CD,
see pages 11 – 13.
To play an MP3 disc,
see pages 16 – 20.
To operate external components
(AUX INPUT and LINE INPUT),
see pages 31 – 32.
To operate the CD changer,
see pages 33 – 34.

BASIC OPERATIONS

2
*
**
CD CHANGER
LINE INPUT
3
To drop the volume in a moment
Press and hold
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
To turn off the power
Press and hold SOURCE
appears on the display.
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 24.
Adjust the volume.
To increase the volume.
To decrease the volume.
Volume level appears.
Volume level indicator
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
Adjust the sound as you want.
(See page 21.)
/ATT while listening to any
also restore the sound.
until "SEE YOU"
7