OptiFlow™ Vertical Power Stacker
Clearing Stalls in a Stacker Attached to a DI380/DI425
or DI500/DI600
1. Slide the stacker out, away from inserter.
2. Lift the plastic cover (A) and lower the envelope exit area door
(B) of the inserter. Remove stalled material and close latches.
3. Slide stacker back into inserter. Make sure to push stacker all
the way in, otherwise safety interlock will not engage and system
won't run. Press reset switch on back corner of stacker (4) or Start
key on inserter.
6
A
B
1
2
2
3
SV61322 Rev. C
1
4
3