Install Air Filter; Install Produce Preserver (On Some Models) - Whirlpool W10805717B User Manual

Install Air Filter

An air filter is 15 times more powerful than baking soda at
reducing common food odors inside the refrigerator.
On some models, your refrigerator's accessory packet includes
an air filter which must be installed prior to use.
Installing the Air Filter
Install the air filter behind the blue LED-lighted vent cover, located
on the rear wall near the middle of the refrigerator.
1. Remove the air filter from its packaging.
2. Pull out plastic cover over the vented cover.
NOTE: When cover is removed for the first time, a small foam
part the size of the filter will need to be discarded.
3. Snap the filter into place.
A. Air filter
Replacing the Air Filter
The disposable air filter should be replaced every 6 months.
To order a replacement air filter, contact us. See "Accessories"
section in the User Guide for information on ordering.
1. Remove the used air filter by squeezing in on the side tabs.
2. Install the new air filter using the instructions in the previous
sections.
Install Produce Preserver
(on some models)
The produce preserver absorbs ethylene to slow the ripening
process of many produce items. As a result, certain produce
items will stay fresh longer.
Ethylene production and sensitivity varies, depending on the type
of fruit or vegetable. To preserve freshness, it is best to separate
produce with sensitivity to ethylene from fruits that produce
moderate-to-high amounts of ethylene.
Apples
Asparagus
Berries
Broccoli
Cantaloupe
Carrots
Citrus Fruit
A
Grapes
Lettuce
Pears
Spinach
Sensitivity Ethylene
to Ethylene Production
High Very High
Medium Very Low
Low Low
High Very Low
Medium High
Low Very Low
Medium Very Low
Low Very Low
High Very Low
High Very High
High Very Low
17