Install Freshflow™ Air Filter; Install Produce Preserver - Whirlpool WRF954CIHZ03 Use & Care Manual

Install FreshFlow™ Air Filter
An air filter is 15 times more powerful than baking soda at
reducing common food odors inside the refrigerator.
On some models, your refrigerator's accessory packet includes
an air filter which must be installed prior to use.
Installing the Air Filter
Install the air filter behind the blue LED-lighted vent cover, located
on the rear wall near the middle of the refrigerator.
1. Remove the air filter from its packaging.
2. Firmly grasp plastic cover on the vented cover with both
hands and pull out to remove.
NOTE: When cover is removed for the first time, a small foam
part the size of the filter will need to be discarded.
3. Snap the filter into place.
A. Air filter
20
Replacing the FreshFlow™ Air Filter
The disposable air filter should be replaced every 6 months.
Some air filters have an indicator that replacement is needed.
To order a replacement air filter, contact us. See the
"Accessories" section in the Use & Care Guide for information on
ordering.
1. Open cover and remove the used air filter by squeezing in on
the side tabs.
2. Install the new air filter using the instructions in the previous
sections.

Install Produce Preserver

The produce preserver absorbs ethylene to slow the ripening
process of many produce items. As a result, certain produce
items will stay fresh longer.
Ethylene production and sensitivity varies, depending on the type
of fruit or vegetable. To preserve freshness, it is best to separate
produce with sensitivity to ethylene from fruits that produce
moderate-to-high amounts of ethylene.
Apples
Asparagus
Berries
Broccoli
Cantaloupe
Carrots
Citrus Fruit
Grapes
Lettuce
Pears
Spinach
A
(on some models)
Sensitivity
to Ethylene
High
Medium
Low
High
Medium
Low
Medium
Low
High
High
High
Ethylene
Production
Very High
Very Low
Low
Very Low
High
Very Low
Very Low
Very Low
Very Low
Very High
Very Low