Whirlpool W10805717B User Manual page 16

3. Pull the filter out of the housing.
4. Remove the water filter cap from the water filter.
5. Install the water filter cap onto the new filter. Be sure to align
the arrows so the grooves in filter align with ribs in filter cap.
6. Insert the filter into the housing.
16
7. Twist the water filter and turn 90° clockwise until it locks into
place and that arrows are aligned.
8. Push the water filter door closed.
The Water Filter Status Light
The water filter status lights will help you know when to change
your water filter. The app will also send notifications to your
mobile device and tell you the filter life remaining (100% to 0%).
■ ORDER FILTER (yellow) - It is almost time to change the
water filter. "Order Filter" display is on all of the time but off in
Cooling Off and Showroom mode.
■ REPLACE FILTER (red) - Replace the water filter. While you are
dispensing water, "Replace Filter" will blink 7 times and
an alert tone will sound 3 times.
NOTE: "REPLACE FILTER" will remain illuminated if a filter is
not installed or is installed incorrectly.
■ RESET FILTER - Touch FAST COOL and ENERGY SAVER for
3 seconds to reset water filter. The display will do a 3-second
countdown, then flash the icon and play a tone.