1. Back View as Fig.1
Remove screw on the cap of pedestal
2. Remove Pedestal cap as Fig.2
There are 3 screws to fix between pedestal and back cover
3. After removing Pedestal base as Fig.3
Fig. 3
4. Remove Bezel as Fig.4 ~ 7
a. Open click on the l
eft down side and right down side
b. Open click on the right side and left side of bezel
c. Open
click on the left up side and right up side of bezel
Fig. 4
Mechnical instructions
screw
Fig. 1
screw
Fig.2
5. Remove back cover as Fig.8 ~ 10
a. Control panel removal on the 1712 connector
b. Open click on the right side of back cover
c. Open click on the left side of back cover
of bezel
Click
17
150S4 LCD
Go to cover page
Fig. 5
Fig. 6
Fig. 7
Fig. 8
1712 connector
Click
Fig. 9
Fig. 7
Click
Fig. 10