A
WF7500K-DC68-03667A-01_EN.indd 23
To connect the water hoses to the faucets:
1. Connect one end of each water hose to
B
2. Turn the fittings by hand until they are
3. When done, pull the water hoses up
4. Put the other ends of the hoses into
the Hot (B) or Cold (A) tap.
tight, and then tighten them by just an
additional two-thirds of a turn with a
wrench. Do not overtighten the fittings.
You can damage them.
and down to check if they are properly
connected.
a bucket and open the taps for 10-15
seconds to remove impurities. When
done, close the taps.
English 23
2016/4/1 9:20:07