Extender Kit Installation - Tripp Lite B126-1A1-POC Owner's Manual

Extender Kit Installation

Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings or walls.
2. To achieve maximum distance and performance, use 24 AWG solid-wire Cat5e/6
cable. Using stranded-wire Cat5e/6 cable or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling.
All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
3. Press the Audio button on the transmitter to switch between stereo and
7.1-channel surround sound audio. The unit is set to transmit stereo by default.
OPTIONAL
LOCAL MONITOR
LOCAL TRANSMITTER
1. Make sure the HDMI source is turned OFF.
2. Connect the HDMI source to the INPUT port on the transmitter.
3. Optional: Connect a local monitor to the LOCAL port on the transmitter.
4. Connect the external power supply to the transmitter, and plug it into a
Tripp Lite surge protector, power distribution unit (PDU) or
uninterruptible power supply (UPS). The green RJ45 LED lights to
indicate the unit is receiving power.
15-12-242-933539-EN.indd 4
Blu-ray™ PLAYER
AUDIO LOCAL INPUT
Up to 125 ft. at 1080p (60Hz)
OUTPUT
REMOTE RECEIVER
4
OUTPUT
1/8/2016 1:51:35 PM