Brother MFC-9460CDN User Manual page 50

Chapter 7
Brightness
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options.
Press a or b to choose Brightness.
Press OK.
e
Press d or c to make a lighter copy or a
darker copy.
Press OK.
f
Press Mono Start or Colour Start.
To change the default setting follow the steps
below:
a
Press Menu, 3, 2.
b
Press d or c to make a lighter copy or a
darker copy.
Press OK.
c
Press Stop/Exit.
44
Downloaded from ManualsPrinter.com Manuals
Colour Adjust (Saturation)
7
You can change the default setting for colour
saturation.
To change the default setting follow the steps
below:
a
. Press Menu, 3, 4.
b
Press a or b to choose 1.Red,
2.Green, or 3.Blue.
Press OK.
c
Press d or c to increase or decrease the
colour saturation.
Press OK.
d
Return to step b to choose the next
colour. Or press Stop/Exit.
7