Chapter 2
Setting Lock
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator or your Brother dealer.
While Setting Lock is On, you cannot change
the following settings without a password:
Mode Timer
Paper
Volume
Ecology
Tray Use
LCD Contrast
Security
Document Scan
Address Book
Dial Restrict
Printer (Emulation, Duplex, Output Color,
Reset Printer, Frequency)
Network settings (except Status, Mac
Address, Scan to FTP, Scan to Network)
Receive Mode
Date&Time
Station ID
Tone/Pulse (except BEL, NOR, SWE,
DAN, FIN)
Dial Tone
Phone Line Set
Reset
Also, machine settings cannot be changed
through the Remote Setup while Setting Lock
is On.
8
Downloaded from ManualsPrinter.com Manuals
Setting up the password
2
a
Press Menu, 1, 7, 2.
b
Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c
Re-enter your password when the LCD
shows Verify:.
Press OK.
d
Press Stop/Exit.
2