ASSEMBLY INSTRUCTIONS
2.
Attach the fan body (A) to the stand pole (B).
Align 2 holes at the pole of fan body (A) and
attach 2 screws (BB) and 2 spring washers (CC)
on it, then tighten the screws (BB) firmly.
To adjust air flow up and down,
tilt the fan to the desired angle.
Tighten the plastic nut tightener (AA)
on both tilt nuts to secure fan head.
HARDWARE USED
AA
P
a l
s
c i t
N
t u
T
∅ 5/16 in. x 5/8 in. Screw
BB
CC
∅ 3/8 in. Spring Washer
Hexagonal Head
DD
Screw Key
3. CUT AND REMOVE all the protective
plastic ties from the fan blade
with scissors or cutters.
g i
h
e t
n
r e
2
3
6
AA
CC
BB
x
2
x 2
x 2
x 1