Assembly Instructions; Hardware Used - Utilitech HVP-24S180 User Manual

ASSEMBLY INSTRUCTIONS

1. Loosen the 3-wing plastic head
screw from the outer tube of stand
pole (B). Extend the inner tube to
maximum height.
Insert the spring (D) into the outer
tube of stand pole (B) and tighten
back the 3-wing plastic head screw
firmly.
Attached stand pole (B) to the base
(C) and secure with 5 screws (BB)
and 5 spring washers (CC) with
hexagonal head screw key (DD).
Make sure all screws are tightened
firmly.

HARDWARE USED

∅ 5/16 in. x 5/8 in. Screw
BB
∅ 3/8 in. Spring Washer
CC
Hexagonal Head
DD
Screw Key
2
D
5
B
BB
CC
C
x 5
x 5
x 1