Table of Contents
Advertisement
Connect To The Power Source
Connect the supplied power cord to the display.
The display should be installed close to an easily accessible power outlet. Fully insert the prongs into
the power outlet socket. A loose connection may cause image degradation.
Only plug TV into an electrical outlet that has a GFCI circuit. If you run an extension cord, make sure
it is an outdoor rated cord and plug. Insure that is placed safely and out of the way of people and
animals.
Prepare Your Display For Mounting
Note: Install cables prior to mounting your display. Rear cover plate may be obstructed once the
display is mounted.
IMPORTANT:
1. Do not apply pressure to the screen display area which may compromise the integrity of the
display. The manufacturer's warranty does not cover user abuse or improper installations.
2. Do not mount screen so that it is facing into direct sunlight. Picture quality will not be optimal in
direct sunlight applications.
Wall mounting solution is not included with the unit and is sold separately. Peerless-AV provides a
variety of all-weather mounting solutions. Contact your Peerless-AV representative for
all-environment mounting solutions.
For your safety, only mount with an UL listed wall mount bracket that supports the weight of the
display. When mounting the display outdoors or in harsh environments, only use wall mounts that are
designed to resist water, rust and wind.
Examine the chart below to determine the mounting specifi cations for your display:
CL-4765
CL-5565
400mm
Prepare The Screen For Viewing
1. Remove protective fi lm from the screen.
2. Clean the screen with an approved screen cleaner or Isopropyl alcohol designated in the "Care of
Screen" section. Do not use any window cleaners or anything containing ammonia.
Mounting Hole
Model
600mm x 400mm
600mm x 400mm
Required Mounting
Pattern
Four M8 screws
Four M8 screws
600mm
9
2014-06-13
Screws
#:220-9001-5
(2016-03-02)
Advertisement
Table of Contents
