Table of Contents
Advertisement
FCC CAUTION
To assure continued compliance and possible undesirable interference, ferrite cores may be used
when connecting this display to video equipment; and maintain at least 400mm spacing to other
peripheral device.
Notice
CAUTION: Please use the power cord provided with this display in accordance with the table below.
If a power cord is not supplied with this equipment, please contact your supplier. Only plug equipment
into receptacles with GFCI protection.
IMPORTANT: Peerless-AV is not responsible for any issues created by water present at the
plug/receptacle insertion point.
Relevant Information
Record your display's model and serial number here for future reference. Keep this user manual in
an accessible location in the event settings need to be changed or service is desired.
Note: Your display serial number can be found on the box and underneath the rear cover plate
Model Number ____________________________________
Serial Number ____________________________________
5
2014-06-13
#:220-9001-5
(2016-03-02)
Advertisement
Table of Contents
