Table of Contents
Advertisement
Connect To The Power Source
1. Connect the supplied electrical cord to the
display ensuring the slot in the cord plug
aligns with the tab on the display plug.
2. Hand tighten the electrical cord nut to the
display.
3. Install the electrical cord stress relief
retaining bracket. Failure to install the
retaining bracket may lead to damage
resulting in injury or death.
4. Insert the prongs of the electrical cord into
the electrical outlet and ensure the plug
is fully seated. The display should only be
connected to an electrical outlet that has a
GFCI circuit.
10
2017-02-07
#:180-9097-2
(2017-04-17)
Advertisement
Table of Contents
