Sony SRS-XB2 Help Manual page 46

Hint
The operation above is an example. For more details, refer to the instructions manual for your computer.
When the BLUETOOTH standby function is turned on, the speaker turns on automatically by operating a BLUETOOTH device, and starts the
BLUETOOTH connection.
Note
When the speaker made a connection automatically with the last connected BLUETOOTH device, the BLUETOOTH function may not work
properly. In this case, terminate the BLUETOOTH connection by operating the connected BLUETOOTH device and reestablish a connection.
When an audio cable is connected to the speaker's AUDIO IN jack while the speaker and the BLUETOOTH device have been connected via a
BLUETOOTH connection, sound from the BLUETOOTH-connected device is not output from the speaker (the hands-free function is available). To
listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker's AUDIO IN jack.
Related Topic
How to make a wireless connection with BLUETOOTH devices
Pairing and connecting with a computer (Windows 8)
Listening to music of a device via BLUETOOTH connection
Terminating the BLUETOOTH connection (After use)
Using the BLUETOOTH standby function
4-587-625-11(2) Copyright 2016 Sony Corporation
41