Using The Bluetooth Standby Function - Sony SRS-XB2 Help Manual

Help Guide
Personal Audio System
SRS-XB2

Using the BLUETOOTH standby function

When the BLUETOOTH standby function is turned on, the speaker turns on automatically by operating a BLUETOOTH device,
and starts the BLUETOOTH connection.
Before operating the speaker, note the following:
The BLUETOOTH standby function can be set only when the speaker is connected to an AC outlet via the USB AC adaptor.
When the speaker is being powered by the built-in battery only, the BLUETOOTH standby function is not available.
If pairing information is not stored in the speaker, such is the case when the speaker is used for the first time after purchase,
the speaker will not enter the BLUETOOTH standby mode.
Connect the speaker to the AC outlet.
1
Turn on the speaker.
2
The (power) indicator lights up in green.
Press and hold the
3
orange.
The speaker turns off and enters the BLUETOOTH standby mode.
When the speaker is accessed by a BLUETOOTH device, the speaker turns on automatically and starts the BLUETOOTH
connection.
To turn off the BLUETOOTH standby function
Perform step 1 to 2 above again and press and hold the
off. The BLUETOOTH standby function is turned off and the speaker will turn off.
(power) button for at least four seconds until the
(power) button over four seconds until the
(power) indicator lights up in
(power) indicator turns
9