Sony SRS-XB2 Help Manual page 33

*
If a passkey is required, enter "0000."
If [SRS-XB2] does not appear, perform the operation again from step 3.
* A passkey may be called "Passcode," "PIN code," "PIN number," or "Password."
3.
When the following screen appears, click [Close].
The computer begins installing the driver.
The " " mark will appear in the bottom left of the [SRS-XB2] icon during installation. When the "
driver installation is complete. Proceed to the next step (substep 4).
Depending on the computer, installation may take time. If driver installation takes too much time, the auto power off
function of the speaker will cause it to turn off automatically. If this happens, turn the speaker on again.
4. Right-click on [SRS-XB2] in [Devices] and select [Sound settings] from the menu that appears.
" mark disappears,
28