Craftsman 98023 Operator's Manual page 9

40v max* lithium chain saw
Table of Contents

Advertisement

Available languages

Available languages

• Disconnect the charger from the outlet before attempting any cleaning, This will reduce the risk
of electric shock. Removing the battery pack will not reduce this risk.
• NEVER attempt to connect 2 chargers together,
• The charger is designed to operate on standard household electrical power (120 Volts). Do
not attempt to use it on any other voltage.
iMPORTANT
SAFETY
iNSTRUCTiONS
FOR BATTERY
PACKS
z_WARNING:
For safe operation,
read this manual and manuals
originally
suppfied
with toot
before using the charger.
The battery
pack is not fully charged
out of the carton.
Before using the battery pack and charger,
read the safety instructions
below. Then follow charging
procedures
outlined.
READ ALL INSTRUCTIONS
• Do not incinerate
the battery
pack even if it is severely
damaged
or is completely
worn
out.
The battery pack can explode
in a fire. Toxic fumes and materials
are created
when battery packs
are burned.
• Do not charge
or use battery
in explosive
atmospheres,
such as in the presence of flammable
liquids, gases or dust.
Inserting or removing
the battery from the charger may ignite the dust or fumes.
• tf battery
contents
come
into contact
with the skin, immediately
wash
area with
mild soap
and water,
ff battery liquid gets into the eye, rinse water over the open eye for 15 minutes
or
until irritation ceases.
If medical attention
is needed,
the battery electrolyte
for Li-ion batteries
is
composed
of a mixture of liquid organic carbonates
and lithium salts.
• Contents
of opened
battery
cells may cause respiratory
irritation.
Provide fresh air. If symptoms
persist, seek medical attention.
z_WARNING:
BURN HAZARD.
BATTERY
LIQUID MA Y BE FLAMMABLE
IF EXPOSED
TO
SPARK
OR FLAME.
• Charge the battery packs only in Craftsman
_' chargers.
• DO NOT splash
or immerse
in water
or other
liquids.
This may cause premature
cell failure.
• Do not store
or use the tool and battery
pack in locations
where the temperature
may reach
or exceed
105°F (40°C) (such as outside
sheds
or metal buildings
in summer).
z'_WARNING:
Never attempt
to open the battery pack for any reason.
If battery pack case is
cracked
or damaged,
do not insert into charger. Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has received
a sharp blow, been dropped,
run over or damaged
in
any way (i.e., pierced with a nail, hit with a hammer,
stepped on). Damaged
battery packs should be
returned
to service center for recycling.
z_WARNING:
Fire hazard.
Do not store
or carry
battery
so that metal
objects
can contact
exposed
battery
terminals.
For example,
do not place battery in aprons,
pockets,
tool boxes,
product
kit boxes,
drawers,
etc., with loose nails, screws, keys, etc. Transporting
batteries
can
possibly
cause fires
if the battery
terminals
inadvertently
come
in contact
with conductive
materials
such as keys,
coins,
hand tools
and the like.
The US Department
of Transportation
Hazardous
Material
Regulations
(HMR) actually prohibit
transporting
batteries
in commerce
or on
airplanes
(i.e., packed
in suitcases
and carry-on
luggage)
UNLESS
they are properly
protected
from
short circuits. So when transporting
individual
batteries,
make sure that the battery
terminals
are
protected
and weft insulated
from materials
that could contact
them and cause a short circuit.
NOTE:
M-ION
batteries
should
not be put in checked
baggage.
STORAGE
RECOMMENDATIONS
1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold.
2. Long-term storage will not harm the battery pack or charger, unless the battery is depleted.
CHARGING
PROCEDURE
Craftsman cechargers are designed to charge Craftsman <°'_ battery packs.
1. Plug the charger into an appropriate outlet before inserting the battery pack.
2. Insert the battery pack into the charger.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents