Fujitsu AOYG45LAT8 User Manual page 17

For Floor Type < AGYG09/12/14 >
(Function and Operation Range)
Each time the button is pressed,
the air direction range will change as follows:
(Air Direction Range)
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry / Fan mode Horizontal flow
Heating mode
When the temperature of the air being blown out is low at the start of heating operation or during
defrosting, the airflow direction temporarily becomes
During Monitor operation in AUTO CHANGEOVER mode, the airflow direction automatically
becomes , and it cannot be adjusted.
2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing .
(Swinging Range)
Cooling / Heating / Dry / Fan mode :
When the indoor fan is either at S-Lo or Stop mode, the swinging operation is interrrupted
and it stops at either upper end or bottom end.
Downward flow
01-16
to prevent cold air being blown onto the body.