Fujitsu AOYG45LAT8 User Manual page 15

For Floor / Ceiling Type
(Function Range)
Each time the button is pressed, the air direction range will
change as follows:
1 2 3
( Air Direction Range : Ceiling installation)
(Operation Range)
Cooling / Heating / Dry / Fan mode :
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry / Fan mode
Heating mode
The indoor fan motor starts after the louver reaches to the setting position.
1-2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
The range of swing depends on the set airflow direction.
(Swinging Range)
Cooling / Dry / Fan mode
Heating mode
When the indoor fan is either at S-Lo or Stop mode, the swinging operation is interrupted
and it stops at either upper end or bottom end.
( Stop mode means Operation stop.)
ABYG14/18 >
<
4 5 6 7
1
2
3
4
5
6
7
1 2
Horizontal flow
Downward flow
7
( Air Direction Range : Floor installation)
3 4 5 6 7
1
7
01-14
6
7