Overview; Adjusting The Carry Handle; Securing The Child - CONCORD air.safe Manual

_ oVERViEW

01 Carry handle
02
Instructions for size adjustment
03
Headrest
04
Harness padding
05 Lap harness belt guides
06
Seat minimiser
07
Harness lock
08
Harness for central adjustment
09
Control knob central adjustment
10 Control knob carry handle
11
Sun visor
12
Shoulder harness arrester
13
Bag for sun visor and operating instructions
14
Operating the ProFix system
15 ProFix connector

_ aDJUSTinG THE CaRRy HanDlE

Image 1 - The carry handle (01) of the CONCORD AIR can be locked in
two positions. Simultaneously press the control knobs (10) on the left
and right joints of the handle to change its position.
Move the carry handle (01) into the desired position while pressing and
holding the control knobs (10), until the handle audibly clicks into place
and is anchored securely.
20

_ SECURinG THE CHilD

Preparing the seat // Image 2 - Press and hold the control knob (09)
on the central adjustment, while simultaneously pulling the shoulder
harnesses towards you.
Image 3 - Press and hold the size adjustment (02) on the headrest (03)
upwards, until the headrest (03) reaches its top-most position.
Image 4 - Open the harness lock (07) by pressing the red button on
the lock (07), and move the shoulder straps up and outwards, and the
crotch strap downward.
Placing the child - Place the child into the CONCORD AIR and bring
together the two shoulder straps at the front of the child.
Ensure that none of the harness straps are twisted!
Image 5 - Align the two lock tongues of the shoulder straps and push
them into the harness lock (07) until you hear a loud click.
Adjusting the size // Image 6 - Press the height adjustment controls
(02) up, and adjust the height of the headrest (03) to the size of the
child, while keeping the control button (02) pressed. Release the button
(02) of the headrest and make sure you hear the headrest (03) click
into place.
The shoulder harness guide should be situated slightly above the
child's shoulder. The shoulder harnesses should lie in the middle
between the child's neck and the outer edge of the shoulder.
Tightening the harness // Image 7 - Tighten the harness by pulling
the strap of the central adjuster (08) until it lies snug against the
child's body.
21