Installing Gear Vr Software - Samsung Gear VR SM-R322 User Manual

Installing Gear VR Software

You must install the Gear VR software in order to use the Gear VR. When you connect the mobile device to
the Gear VR for the first time, the set up process automatically begins.
Note: Connect your mobile device to an active network or Wi-Fi connection before performing the setup
process.
1. Unlock your mobile device and turn up the volume.
2. Carefully install the compatible mobile device into the Gear VR compartment For more information refer
to Installing the Mobile Device.
Important: If the mobile device is not connected properly to the Gear VR, you are not prompted to continue
with the set up process.
3. At the voice prompt, separate the mobile device from the Gear VR and remove the mobile device.
4. Tap Next on the Welcome screen and follow the prompts.
Note: During this initial process, you might be prompted to update your device software.
5. When prompted, tap Install Apps to begin installing selected VR applications.
6. Tap Browse Oculus Store and locate desired apps or media files.
- or -
Carefully re-connect the mobile device back into the Gear VR. The next step checks whether or not you
are correctly wearing the Gear VR.
Note: If the screen appears tilted or skewed while using the Gear VR, take it off and then place the Gear VR
on a flat surface. Wait 5-7 seconds before using it again.
33