3D Active Glasses
: User's Guide
,0Zlt' f !:tftrh' i il/!!fptWf!t'
For the initial pairing
If the user takes the 3D glasses out of the box and briefly presses the power button, the glasses
are turned on and the pairing process is started automatically.
Be sure to power on the TV before you press the power button.
If the first attempt to pair fails, turn on the TV (20 or 3D) and press the Power button on the 3D
glasses. The 3D glasses will power on and there will be another attempt to pair.
What is Pairing? It is a process to share Information and connect 3D Glasses with a 3D
Recommended viewing distance
• Operating range
• Turning the glasses on
th3 f.XJMT bJtton troIy.
fa' 3 ooxrds.
• Turning the glasses off
Perfonming the pairing process.
'hi I::ii< fa' 2
• To perfonm the pairing process again
1. If a user presses and holds the power button on the 3D glasses for at least 2 seconds when it is
turned off, the power is turned on and the pairing process starts.
If the user presses and holds the power button of the 3D glasses for at least 2 seconds, the
pairing process starts.
If the pairing process fails, the power is turned off.
The maximum viewing distance may vary depending on obstacles (human body, metal, wall,
etc.) or electromagnetic wave near the 3D glasses.
Turn off the 3D glasses while they are not in use. If you leave the 3D glasses on, the battery
Button Battery (CR2025)
3D Active glasses
Liquid crystal shutter
The 3D glasses enable you to view 3D images. To view 3D images, you need both a pair of 3D glasses and a
5amsung 3D TV. 55G-31 00G8 allows you to connect devices via the 2.45GHz RF band.
[The 5amsung 3D glasses cannot connect to a non-5amsung wireless communication device.)
Performing 3D Active Glasses pairing