Samsung Gear VR SM-R322 User Manual page 25

3. Verify that your device volume is on and not set to silent.
Caution: If you insert the mobile device tilted to one side, it may cause discomfort.
4. Carefully insert the mobile device (face down) at an angle into the center of the Gear VR and then
insert the Gear VR connector (1) into the mobile device's USB port.
Note: Ensure that the connector is fully inserted into the mobile device's USB port. The device makes a sound
when properly connected.
Caution: Do not forcefully insert the connector into the mobile device as this may damage the connector.
Improper installation can scratch the mobile device.
5. While pulling the device holder (right) outward (2), carefully push the opposite end of the mobile device
downward (3).
6. Gently push down on the device holder (right) (4) until the mobile device locks into place.
Caution: If the mobile device is not securely locked, the mobile device may accidentally separate from the
Gear VR and be damaged. Do not twist or bend the Gear VR's connector when you connect or disconnect the
mobile device. Doing so may damage the connector.
24