To deactivate the Do Not Disturb Mode:
1. From an active Gear VR screen, press and hold the
2. Place the pointer on top of
screen displays Do Not Disturb: Off.
Note: Once deactivated, you hear new notifications such as those for new incoming calls.
Adjusting Brightness
1. From an active Gear VR screen, press and hold the
2. Place the pointer on top of
3. Swipe upward/downward over the touchpad to move the displayed slider up (increase brightness) or
down (decrease brightness).
48
Do Not Disturb and tap the touchpad to deactivate the feature. The
Brightness, then position it over the displayed slider.
Back key.
Back key.