Epson DLQ-3500 Reference Manual page 83

The printer does not fully eject the paper.
Cause
You may not be able to fully
eject your paper using the
LF/FF button.
Your paper may be too long.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause
The printer has not fully
ejected your paper.
What to do
Use the Load/Eject button to eject the
paper.
Make sure the page length of your
paper is within the specified range. See
the single-sheet paper specifications in
"Single sheets" on page A-11. Also
check and adjust the paper size setting
in your application or the printer
driver.
What to do
Remove the paper by hand; the Paper
Out light goes out. If you are printing
a multiple-page document, insert a
new sheet of paper into the paper
guide. The Pause light goes out and
the printer automatically loads the
paper and resumes printing.
Troubleshooting
4-7