Epson DLQ-3500 Reference Manual page 58

Printer settings
Settings
Paper size
Orientation
Paper Source
Resolution/
Graphics
Resolution
Dithering
Intensity/
Intensity
Control
Print quality
EPSON Status
Monitor 3
Monitoring
Preferences
Paper/Output
2-12
Printer Software
Explanations
Select the size of the paper you want to use. If you
do not see your paper size, use the scroll bar to scroll
through the list. If your paper size is not included in
the list, click Custom or User Defined Size and enter
the paper size in the dialog box that appears.
Select Portrait or Landscape.
Select the paper source you want to use.
Select the printing resolution you want. The higher
the resolution you select, the more detailed your
printout will be; however, increasing the resolution
slows printing.
You can leave this option set to Fine, which is the
default setting, or select another dithering pattern
depending on the kind of printout you want.
Move the slider to make your printout lighter or
darker.
Select a print quality option from the Print quality list.
If you turn on Hi-speed, you will enter bi-directional
printing mode and printing speed will increase.
Turning Hi-speed off will return the printer to
uni-directional printing mode. Printing speed will
decrease, but printing precision will improve.
Printing with the default settings uses the settings
stored in the printer.
You can access the EPSON Status Monitor 3 utility
when you click this button. To monitor the printer,
make sure the Monitor the printing status check box
is selected.
Click this button to open the Monitoring
Preferences dialog box where you can make
settings for the EPSON Status Monitor 3 utility.
Check the Paper Size, Orientation, and Paper
Source settings you made on the Page Setup menu
and change them if necessary. Select the setting
and then choose an option from the Change
Setting list box.