System Requirements; Package Contents; Optional Accessories - D-Link DWL-6610AP Quick Installation Manual

Unified concurrent dual-band access point

Hide thumbs Also See for DWL-6610AP:

Quick installation manual (17 pages)

User manual (754 pages)

Administrator's manual (130 pages)

Table Of Contents

Table of Contents

DWL-6610AP Quick Install Guide

This installation guide provides basic instructions for installing the DWL-6610AP Wireless

Access Point on your network. For additional information about how to use the Access Point,

please see the User's Manual which is available on the CD included in this package or from

the D-Link support website.

Minimum System Requirements:

• CD-ROM Drive

• An Ethernet port, or an installed Ethernet adapter

• Internet Explorer 7.0, Safari 5.0, Firefox 3.5, Chrome 20 or later versions of these

browsers

ƒ DWL-6610AP 802.11ac Power over Ethernet (PoE) Access Point

ƒ Power Adapter*

ƒ Mounting Ring

ƒ Ethernet Cable

ƒ Console Cable*

ƒ CD-ROM

If any of the above items are missing, please contact your reseller.

Note: Using a power supply with a different voltage than the one included with the

DWL-6610AP will cause damage and void the warranty for this product.

*No PSU supplied in EU region. To power the units use an D-Link PoE switch or the D-Link

DPE-101GI PoE injector.

*Console cable is an optional accessory and not included in the package in Armenia,

Azerbaijan, Belarus, Georgia, Israel, Pakistan, Kaliningrad, Kazakhstan, Kyrgyzstan, Latvia,

Lithuania, Moldova, Mongolia, Russia, Turkey, Turkmenistan, Ukraine and Uzbekistan. If

required, please contact your reseller (model: ACS-AP-CONSOLE).

ƒ PoE Base Unit (Model: DPE-101GI)

Note: These accessories are not included in the package. If any of these items are required,

please contact your reseller.